Stainless Steel Molecular Distiller
Molecular distillation is a special liquid-liquid separation equipment. Unlike traditional distillation, it relies on the boiling point difference separation principle, but on the difference of the average free path of different substances. When the liquid mixture flows along the inner wall of the main evaporator and is heated, light and heavy molecules will escape from the liquid level and enter the gas phase. Due to the different free paths of light and heavy molecules, the molecules of different substances move different distances after escaping from the liquid level. After passing through the built-in condensate pipe of the main evaporator, the light molecules reach the condensate pipe and are discharged, while the heavy molecules cannot reach the condensate pipe and are discharged along the mixed liquid, So as to achieve the purpose of material separation.
l Stainless steel wiped film glass molecular distillation system-For mid-level distillation volume
l Feed rate from 50L to 300L per hour
l Driving motor with magnetic coupling sealing ensures high vacuum level
l Continuous feeding and discharging under vacuum state are realized by gear pump
l External two stage condensers with chiller for better protection for the Vacuum pump
l Precise temperature control and fully jacketed system ensures high quality and productivity
l Stainless steel with faster heat conduction is adopted, and 316L stainless steel is used in contact with materials
l A variety of configurations are available to meet the customer's budget
1. Magnetic seal, special seal for high vacuum, no-load limit vacuum can be less than 5PA (matched with rotary vane vacuum pump and roots pump), such as water jet pump and roots pump unit, vacuum can be less than 1KPA. The control box controls the oil pump, main evaporation chamber, automatic feeding and automatic discharging. Most of the electrical components in the control box are made of imported materials, which are durable.
2. The gear pump is used to drive the continuous feeding and discharging, and for the pilot level molecular distillation, the production capacity is improved; The pipeline of the feed and discharge pump is fully jacketed, and the material is insulated, which is suitable for a variety of material properties; All materials in contact with materials are made of 316L
3. The tank in the main evaporation chamber is integrally formed to reduce the generation of air leakage points, stabilize the vacuum degree, receive the condenser tube array, and quickly collect liquefied materials
4. Stainless steel is sprayed with frosted surface treatment, beautiful and durable, not easy to produce fingerprints; The welding process adopts the swing welding technology
Model | QYMD-1SS | QYMD-1.5SS | QYMD-2S | QYMD-3SS | QYMD--5SS |
Effective evaporation area(m2) | 1 | 1.5 | 2 | 3 | 5 |
Internal Condensation Area(m2) | 2.7 | 3.5 | 4.9 | 6.5 | 8 |
Feed rate(L/h) | 50-120 | 60-180 | 100-200 | 100-300 | 200-500 |
Feed tank volume(L) | 100 | 100 | 100 | 200 | 200 |
Speed(r/min) | 0~300 | ||||
Material | Stainless Steel 304 external, 316 internal | ||||
Motor film scraping system | roller wiper available system with speed adjustable drive system and magnetic coupling | ||||
Material of wiper rollers | PTFE (max operating temperature 300°C) | ||||
Volume of light component collect flask | The gear pump discharges continuously and is equipped with an observable window | ||||
Volume of heavy component collect flask | The gear pump discharges continuously and is equipped with an observable window | ||||
Motor power(W) | 1100 | 1100 | 1500 | 1500 | 1500 |
Work temperature | Evaporator max operating temperature 250°C(Optional 300℃） Condenser operating temperature range -20°C to 100°C(Optional) | ||||
Voltage(V) | 380V 50 60HZ | ||||
Relevant contents:
